J Korean Soc Environ Anal Search

CLOSE


Journal of the Korean Society for Environmental Analysis 2010;13(3):166-172.
Development of Ion Selective Solid Contact Electrode Based on Methyl-tri-octyl-ammonium Ion Ionophore for Iodide Detection
메틸트리옥틸-암모늄 이온 Ionophore를 이용한 요오드 이온 선택성 고체 접촉 전극
홍태기1, 이혜림1, 박운석1, 이영훈1, 한원식2
1한서대학교
2null
Abstract
In this study, an iodide ion selective poly(aniline) solid contact electrode based on methyltrioctyl-ammonium ion ionophore as a sensing material was developed. This electrode was made of Me-TOA 2.0, PVC 30.0, and NPOE 68.0. The electrode exhibits a good linear response of 58.8 mV/decade (at 20 ± 0.2oC, r 2= 0.9998)within the range of 1×10-1 M~1×10-5.2 M KI solution. When the electrode was used with different alkyl chain ionophores and plasticizers, this electrode had the best result in response characteristics. The electrode showed a good selectivity for iodide ion than any other anions and is suitable detect it in aqueous solutions of pH 3.0~12.0. Their standard deviation in the measured emf differences was ± 1.2 mV at iodide sample solution of 1.0×10-2 M and ± 0.9 mV at 1.0×10-4 M. Their stabilization time was less than 125 sec, and response time was less than 22 sec.
Key Words: ISE, SCE, selectivity, ionophore, iodide ion


ABOUT
ARTICLE CATEGORY

Browse all articles >

BROWSE ARTICLES
EDITORIAL POLICY
FOR CONTRIBUTORS
Editorial Office
Hansin B/D 305 MapoDeae-ro 12, Mapo-Goo, Seoul, 04175 Korea
Tel: +82-2-704-4801    Fax: +82-2-704-4802    E-mail: ksfea7044801@gmail.com                

Copyright © 2023 by Korea Society of Environmental Analysis. All rights reserved.

Developed in M2PI

Close layer
prev next